XT40 hand-held torch with 12-ft. (3.7 m) cable. Torches include a complete set of 40 A consumables
Heavy-duty work clamp and flexible cable with quick connect
12-ft. (3.7 m) power cord with 240 V L6-30P twist lock plug for MVP™ adapters
MVP™ adapters with 240 V, 50A (6-50P) plug and 120 V, 15 A (5-15P) plug
X-CASE™ provides protection during transport and storage
Consumables box with 2 electrodes, 2 tips (40 A), 1 tip (30 A), drag shield (30 A), deflector, and air fitting
Rated Cutting Capacity
The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements.
XT30 Torch & Quick Connect Work Lead and Clamp
Ergonomic handle with unique no-slip grip, thumb guide and finger contours help prevent operator fatigue while the flexible cable makes maneuvering easy. Comes with the ultra flexible Quick Connect work lead with smaller heavy duty clamp.
Auto-Line™ and MVP™ (multi-voltage plug)
Auto-Line provides state-of-the-art flexibility to the end user. The Auto-Line circuitry automatically connects to 120–240 VAC, single-phase power, 50/60 Hz, without removing the covers to relink the power source. The Miller multi-voltage plug (MVP™) allows connection to 120 or 240 V receptacles without tools—choose the plug that fits the receptacle and connect it to the power cord.
Auto-Refire™ Technology provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal—all automatically! No need for manual re-triggering which reduces user hand fatigue.
Automatic Air Regulation
The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance.
Portable in the shop or at the job site—at 19 lb the shoulder strap allows the end user to easily move from location to location.
Miller's X-CASE provides ultimate protection during transport and storage. Additional space is ideal for MVP Plugs, consumable box, as well as gloves, eye protection, etc.
Wind Tunnel Technology™ and Fan-On-Demand™
Wind Tunnel Technology - internal air flow that protects electrical components and PC boards from dirt, dust, debris…greatly improving reliability. Fan-On-Demand cooling system only operates when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit.
Spectrum 625 X-TREME 12-ft. XT40 Quick Connect
Racing / Customizing / Restoring Construction DIY / Home Hobbyist Farm and Ranch Infrastructure Manufacturing Metal Art / Sculptures Shipbuilding Boat / Yacht
Plasma Material Thickness
Mild Steel 5/8 in. (15.9 mm) 15 IPM Stainless Steel 1/2 in. (12.7 mm) 15 IPM Aluminum 3/8 in. (9.5 mm) 15 IPM
Rated Output at 104 Degrees Fahrenheit
120 (15 A): 20 A at 88 VDC, 35% duty cycle; 120 V (20 A) 27 A at 91 VDC, 20% duty cycle; 240 V: 40 A at 140 VDC, 50% duty cycle