All-in-one wire welder that welds 24 gauge - 3/16 in. (0.8-4.8mm) mild steel. The 120V powered Millermatic that is easy to use.
A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter, set the material thickness, and start welding!
Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.
Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistant feeding and easy setup for up to 15-foot MIG guns.
Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire.
Uses 120V household input power so there is no special power requirements. Flexible to use in any location!
This technology provides a smooth, spatter-free start. The best starting machine in the 120V MIG category! No more pop-gun starts or spatter to clean up.
Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded. Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.
|Input Power||Requires 1-Phase power 120V, 20 Amps, 60 Hz|
|Rated Output||90 Amps at 18.5 VDC, 20% duty cycle|
|Welding Amperage Range||30 - 140 Amps|
|Wire Speed||15 - 136 IPM (0.4 - 9.1 m/min)|
|Net Weight||51lb (23.1 kg)|
|WireDiameter Capacity||.024 - .030 in (0.6 - 0.8 mm) Solid Steel.024 - .030 in (0.6 - 0.8 mm) Stainless.030 - .035 in (0.8 - 1.2 mm) Flux Cored|
|MaxSpoolSize Capacity||8 in (203 mm)|
|Dimensions||H: 12.5 in. (318 mm)W: 11.25 in. (286 mm)D: 20.5 in. (521 mm)|