Millermatic 190 MIG Welder

Millermatic 190 MIG Welder

Share
SKU MIL907613
Weight 40.00 lbs
Market Price: $1228.00
Our Price:

$950.00


You Save

23%

Quantity

  • Rating
    Weight 40.00 lbs
    SKU MIL907613
    Manufacturer Miller Electric


    All-in-one wire welder that welds 24 gauge - 5/16 in. (0.8-7.9mm) mild steel. The simplest Millermatic to set-up and start welding.

    Portable

    Portable

    Miller inverter technology reduces the weight of the machine to 35lbs on top of the ergonomically friendly case design, making the machine easier than ever to move around your workspace.

    240V Input Power

    240V Input Power

    Uses 240V input power! Enough power to tackle any size job.

    Angled All Aluminum Drive System

    Angled All Aluminum Drive System

    Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns. The Quick Select drive roll offers three grooves- two for different size solid wire and a third for flux-cored wire.

    Auto Spool Gun Detect™

    Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.

    Auto-Set™

    Auto-Set™

    A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter, set the material thickness, and start welding! As always, Auto-Set can be disabled to manual mode to set custom parameters if desired.

    Fan-On-Demand™

    Fan only operates when needed reducing noise and power consumption.

    Smooth-Start™

    This technology provides a smooth, spatter-free start. The best starting machine in its class! No more pop-gun starts or spatter to clean up.

    Thermal Overload & 'Tip Saver' Short Circuit Protection

    Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded. Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.


    Input PowerRequires 1 -Phase power 240V, 21.7 Amps, 60 Hz
    Rated Output140 Amps at 21 VDC, 40% Duty Cycle
    Welding Amperage Range30 - 190 Amps
    Wire Speed60 - 600 IPM (1.5 - 15.2 m/min.)
    Net Weight35lb (15.9kg)
    MaxOpenCircuitVoltage45
    WireDiameter Capacity.024 - .035 (0.6 - 1.2 mm) Solid Steel.024 - .035 (0.6 - 1.2 mm) Stainless.030 - .035 (0.8 - 1.2 mm) Flux Cored
    MaxSpoolSize Capacity8 in (203 mm)
    DimensionsH: 12.5 in. (318 mm)W: 11.25 in. (286 mm)D: 20.5 in. (521 mm)

    There have been no reviews

    : *
    : *
    : *
     
     

    HYPERTHERM SHIELD, POWERMAX 45

    HYP220673

    $13.60

    HARRIS 5356 1/8" X 36" 1# TIG PACKAGE

    WEL05356-6011PO

    $5.80