All-in-one wire welder that welds 24 gauge - 5/16 in. (0.8-7.9mm) mild steel. The simplest Millermatic to set-up and start welding.
Miller inverter technology reduces the weight of the machine to 35lbs on top of the ergonomically friendly case design, making the machine easier than ever to move around your workspace.
Uses 240V input power! Enough power to tackle any size job.
Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns. The Quick Select drive roll offers three grooves- two for different size solid wire and a third for flux-cored wire.
Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter, set the material thickness, and start welding! As always, Auto-Set can be disabled to manual mode to set custom parameters if desired.
Fan only operates when needed reducing noise and power consumption.
This technology provides a smooth, spatter-free start. The best starting machine in its class! No more pop-gun starts or spatter to clean up.
Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded. Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.
|Input Power||Requires 1 -Phase power 240V, 21.7 Amps, 60 Hz|
|Rated Output||140 Amps at 21 VDC, 40% Duty Cycle|
|Welding Amperage Range||30 - 190 Amps|
|Wire Speed||60 - 600 IPM (1.5 - 15.2 m/min.)|
|Net Weight||35lb (15.9kg)|
|WireDiameter Capacity||.024 - .035 (0.6 - 1.2 mm) Solid Steel.024 - .035 (0.6 - 1.2 mm) Stainless.030 - .035 (0.8 - 1.2 mm) Flux Cored|
|MaxSpoolSize Capacity||8 in (203 mm)|
|Dimensions||H: 12.5 in. (318 mm)W: 11.25 in. (286 mm)D: 20.5 in. (521 mm)|